HS-1800A-100 Flat Top Belt
The HS-1800A-100 is a 100 mm flat top belt in the large-pitch range. Its official product page records a big pitch of 63.5 mm and a mold to width of 100 mm, and describes it as the belt for high-wear or heavy-duty applications. No further figures are recorded for this model.
The product photograph below is from the official large-pitch product page, captioned as a supplier-owned official-site product photograph. It shows the belt; it does not add specifications.
Recorded figures
- Belt pitch: 63.5 mm
- Mold to width: 100 mm
- Described use: high-wear or heavy-duty applications (product-page wording)
These are the only figures recorded for this series in the source material. No further figures are published for this series on this site; ask the supplier to confirm any other figure for the exact series before ordering.
How this model differs from the HS-1800A
Both models share the recorded 63.5 mm pitch. They differ in the recorded width: the HS-1800A records a minimum belt width of 200 mm, while the HS-1800A-100 records a mold to width of 100 mm. Do not treat the two widths as interchangeable, and do not carry a figure from one model onto the other.
The product page describes the HS-1800A-100 in connection with steel slat top chains and drag chains used for high-wear or heavy-duty applications. That description is product-page wording about the application area, not a verified replacement claim for any specific chain. If replacement is the purpose, ask the supplier to confirm suitability for your existing chain before ordering.
What is not recorded
No load figure, no speed figure, and no material assignment is recorded for the HS-1800A-100. Ask the supplier to confirm each one for this exact model in writing.
What to confirm before ordering
- Ask for the load figure that applies to your line, with the document behind it.
- Ask the supplier to confirm suitability for your existing chain, if replacement is the purpose.
- Ask what material is recommended for your operating temperature.