Conveyor Sprockets
Sprockets drive the belt, and idler sprockets support or guide it. Both appear in the source material's accessory list: the official site homepage names sprockets among the accessories, and the accessories family includes idler sprockets. No per-model specifications are recorded for either, so this page carries no figures.
A sprocket inquiry must name the belt it belongs to, because a sprocket is specified against a belt series and pitch, not on its own. The detail pages record pitches for several series — 19.05 mm for the HS-100C, 50.8 mm for the HS-100, HS-100-N, and HS-3600b, 63.5 mm for the HS-1800A and HS-1800A-100, 27.2 mm for the HS-703b-N — and a sprocket question should cite the series and pitch it must match.
Questions a sprocket inquiry must answer
Ask which sprocket is offered for your exact belt series and pitch, and whether it is a drive sprocket, an idler sprocket, or both that you need. Ask what material it is offered in, and whether it is offered as a single part or as part of a set.
Do not assume a sprocket for one series fits another series with the same pitch. Pitch alone does not establish fit; ask the supplier to confirm fit for the exact belt model.
What is not claimed here
No tooth count, bore size, pitch diameter, load, or material figure is claimed for sprockets on this page, because none is recorded. Certificates available upon request.
What to confirm before ordering
- Ask which sprocket is offered for your exact belt series and pitch.
- Ask whether you need drive sprockets, idler sprockets, or both.
- Ask what material the sprocket is offered in.