HS-100C Spiral Belt
The HS-100C is a spiral conveyor belt with stainless-steel chains. Its official product page records a belt pitch of 19.05 mm and the spiral construction with stainless-steel chains, and it carries no full specification table in text. This page therefore publishes those recorded figures and nothing further: any other figure for this series must come from the supplier's written answer, not from this page.
One product photograph from the official product page is shown below, captioned as a supplier-owned official-site product photograph. It shows the spiral belt; it does not add specifications.
Recorded figures
- Belt pitch: 19.05 mm
- Construction: spiral, with stainless-steel chains
These are the only figures recorded for this series in the source material. No further figures are published for this series on this site; ask the supplier to confirm any other figure for the exact series before ordering.
What the photographs show
The photographs show the spiral modular belt from the official HS-100C product page. A spiral belt follows a turning path rather than a straight run, so the questions that matter are about the turn, the chain, and the fit — not about a straight-run figure borrowed from another series.
What is not recorded
No belt width, no load figure, no speed figure, and no material assignment is recorded for the HS-100C in the source material. Do not carry a width or a load figure from another series onto this one. If a width, a load, or a material matters to your order, ask the supplier to confirm it for the HS-100C itself, in writing, before ordering.
What to confirm before ordering
- Ask for the belt width offered for the HS-100C, if width matters to your layout.
- Ask what stainless-steel chain specification applies, and for the document behind it.
- Ask the supplier to confirm interchangeability for your existing belt model, if replacement is the purpose.
- Ask what material is recommended for your operating temperature.