HS-100 Series
The HS-100 series is a modular belt series in the official site navigation, with a recorded pitch of 50.8 mm. That pitch is the only figure recorded for this series: no per-model specification table was captured in text, and no width, load, or speed figure is recorded for it.
This page therefore stays at the recorded figure. A second photograph of the spiral series is not used here, because product photographs are used only on their matching series pages, and the spiral photographs belong to the HS-100C page.
Recorded figures
- Belt pitch: 50.8 mm
These are the only figures recorded for this series in the source material. No further figures are published for this series on this site; ask the supplier to confirm any other figure for the exact series before ordering.
What the pitch does and does not tell you
The pitch is the repeating module size along the belt. It tells you the module family, but it does not by itself tell you the belt width, the load it can carry, or the material it is made from. Each of those must be confirmed for the exact HS-100 model you intend to order.
This series is listed under a generic code that may also match products that are not belts at all. Judge the series on its recorded figure and the supplier's written answer instead.
What is not recorded
No belt width, no load figure, no speed figure, and no material assignment is recorded for the HS-100 series. Do not fill those gaps from another series. Ask the supplier to confirm each one for the exact HS-100 model before ordering.
What to confirm before ordering
- Ask for the belt width offered for the exact HS-100 model, if width matters to your layout.
- Ask what material is recommended for your operating temperature.
- Ask the supplier to confirm interchangeability for your existing belt model, if replacement is the purpose.